SCAN coding of control units - AR54.21-P-0015X

MODEL 129.058 /063 /067 /076, 163, 164, 168, 169, 170, 171.4, 199, 203, 204, 208, 209, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 461.302 /331 /332 /342 /345, 463.206 /208 /209 /232 /233 /240 /241 /243 /244 /245 /246 /247 /248 /249 /250 /254 /270 /271 /303 /308 /309 /322 /323 /332 /333 /340 /341, 450, 451, 452, 454 

	During the whole work procedure, an adequate voltage supply to the vehicle electrical system is to be ensured as undervoltage can damage the control units.
	Notes on SCN coding of control units		AH54.21-P-0004-01X
1	Connect STAR DIAGNOSIS and start Diagnosis Assistant System (DAS)
	Connect STAR DIAGNOSIS and read out fault memory	Model 129.058/063/067/076, 163, 164, 168, 169, 170, 171.4, 199, 203, 204, 208, 209, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 461.302/331/332/342/345, 463.206/208/209/232/233/240/241/243/244/245/246/247/248/249/250/254/270/271/303/308/309/322/323/332/333/340/341	AD00.00-P-2000-04A
		Model 450	AD00.00-P-2000-04SM
		Model 451	AD00.00-P-2000-04MCC
		Model 452	AD00.00-P-2000-04RR
		Model 454	AD00.00-P-2000-04FF
2.1	Carry out on-line SCN coding with SDflash	With networked STAR DIAGNOSIS system.	AR54.21-P-0013-02X
2.2	Carry out Offline SCN coding	With non-networked STAR DIAGNOSIS system.	AR54.21-P-0013-04X
3	Read fault memory, erase if necessary
4	Disconnect diagnostic system		AD00.00-P-2000-04A