General notes: Passenger cars: Complete engine, crankcase ventilation, cylinder head, crankcase - AH01.00-Z-9999AZ
MODEL all
| Bolt diagram cylinder head cover | ENGINE 120 | AH01.20-P-5014-04AO | |
| Determine loss of pressure at cylinder | ENGINE all | AH01.00-N-1300-02A | |
| Determining pressure loss of cylinders | ENGINE 640 | AH01.00-P-1300-02AL | |
| Firing order | ENGINE 111 /, 601 /, 602 | AH01.00-N-0100-01A | |
| General information on inspecting cylinder walls | ENGINE 112, 113, 137, 166, 272, 273, 275, 285 | AH01.00-P-0300-01VA | |
| General information on inspecting cylinder walls | ENGINE 111, 601, 604, 605, 606, 611, 612, 647, 668... | AH01.00-N-0300-01A | |
| General information on inspecting cylinder walls | ENGINE 112, 122, 134, 135, 166, 271, 272, 611, 612, 613, 628, 629, 639, 642, 646, 647, 648, 651... | AH01.00-P-0300-01A | |
| General information on inspecting cylinder walls | ENGINE 266.920 /940 /960 /980 in MODEL 169.0 /3, 245.2 | AH01.00-P-0300-01AK | |
| General information on inspecting cylinder walls | ENGINE 155 | AH01.00-P-0300-01SLR | |
| General information on inspecting cylinder walls | ENGINE 156 | AH01.00-P-0300-01AMG | |
| General information on inspecting cylinder walls | ENGINE 640 | AH01.00-P-0300-01AL | |
| Information for assigning cylinder head gaskets | ENGINE 642 in MODEL 219.322, 221 | AH01.30-P-1000-06TQ | |
| Information for assigning the cylinder head gaskets | ENGINE 112 ENGINE 113 | AH01.30-P-1000-06V | |
| Information for assigning the cylinder head gaskets | ENGINE 642 in MODEL 164, 203, 209, 251.0 /1 ENGINE 642 in MODEL 461, 463 | AH01.30-P-1000-06PI | |
| Information on application of sealant to bottom part of crankcase | ENGINE 628... | AH01.40-P-1000-03B | |
| Information on application of sealant to bottom part of crankcase | ENGINE 629 | AH01.40-P-1000-03TJ | |
| Information on application of sealant to crankcase bottom section | ENGINE 137.970, 275, 285 | AH01.40-P-1000-03A | |
| Information on application of sealant to crankcase bottom section | ENGINE 159 | AH01.40-P-1000-03RQ | |
| Information on application of sealant to crankcase bottom section | ENGINE 156 | AH01.40-P-1000-03AMG | |
| Information on application of sealant to end cover of crankcase | ENGINE 628... | AH01.40-P-1000-04C | |
| Information on application of sealant to end cover of crankcase | ENGINE 137.970, 275 | AH01.40-P-1000-04A | |
| Information on application of sealant to end cover of crankcase | ENGINE 628... | AH01.40-P-1000-04B | |
| Information on application of sealant to end cover of crankcase | ENGINE 651 | AH01.40-P-1000-04CD | |
| Information on application of sealant to end cover of crankcase | ENGINE 629 am Motor vorn | AH01.40-P-1000-04TJT | |
| Information on application of sealant to oil pan | ENGINE 628.960 /961 /962 /963 | AH01.45-P-0001-01MA | |
| Information on application of sealant to oil pan | ENGINE 160.921 /922 /923 in MODEL 452.3 /4 | AH01.45-P-0001-01RR | |
| Information on application of sealant to oil pan | ENGINE 628.961 in MODEL 211.028 | AH01.45-P-0001-01TD | |
| Information on application of sealant to timing case cover | ENGINE 137.970, 275 | AH01.40-P-1000-01C | |
| Information on applying sealant to a cylinder head gasket | ENGINE 112 ENGINE 113 ENGINE 112.951 ENGINE 112.976 | AH01.30-P-1000-04VA | |
| Information on applying sealant to cylinder head gasket | ENGINE 272, 273 | AH01.30-P-1000-04RX | |
| Information on cylinder head contact surface | ENGINE 112, 113, 112.951 /976, 157, 272, 273, 276, 278 | AH01.30-P-1000-05A | |
| Notes application of sealant to end cover with radial shaft seal | ENGINE 642 in MODEL 219.322 | AH01.40-P-1000-06TQ | |
| Notes application of sealant to end cover with radial shaft seal | ENGINE 266, 640 in MODEL 169.0 /3, 245.2 | AH01.40-P-1000-06AK | |
| Notes application of sealant to end cover with radial shaft seal | ENGINE 112, 113 | AH01.40-P-1000-06A | |
| Notes application of sealant to end cover with radial shaft seal | ENGINE 132.9 in MODEL 451.3 /4 | AH01.40-P-1000-06MCC | |
| Notes application of sealing compound to end cover with radial shaft seal | ENGINE 134.9, 135.9 in MODEL 454.0 | AH01.40-P-1000-06FF | |
| Notes concerning application of sealant to an end cover with radial shaft seal | ENGINE 642 in MODEL 203, 209 | AH01.40-P-1000-06PI | |
| Notes for evaluation of a cylinder barrel | ENGINE 160.9 in MODEL 450.3 /4, 452.3 /4 ENGINE 132.9, 660.9 in MODEL 451.3 /4 | AH01.40-P-0001-03SM | |
| Notes for position of engine number | ENGINE 166, 266, 640, 668 | AH01.00-P-0001-01B | |
| Notes for position of engine number | ENGINE 155 | AH01.00-P-0001-01A | |
| Notes for position of engine number | ENGINE 601, 602, 603, 604, 605, 606 | AH01.00-P-0001-01E | |
| Notes for position of engine number | ENGINE 611, 612, 613, 646, 647, 648 | AH01.00-P-0001-01C | |
| Notes on application of sealant oil pan | ENGINE 113.940 /943 /944 /961 /980 /984 | AH01.45-P-0001-01D | |
| Notes on application of sealant oil pan | ENGINE 112.912 /946 | AH01.45-P-0001-01B | |
| Notes on application of sealant oil pan | ENGINE 112 | AH01.45-P-0001-01C | |
| Notes on application of sealant timing case cover | ENGINE 112, 113 | AH01.40-P-1000-01B | |
| Notes on application of sealant to a timing case cover | ENGINE 642 in MODEL 164, 203, 204, 209, 251.0 /1 | AH01.40-P-1000-01PI | |
| Notes on application of sealant to crankcase cover | ENGINE 137.970 | AH01.40-P-1000-05A | |
| Notes on application of sealant to cylinder head cover | ENGINE 272 | AH01.30-P-1000-08V | |
| Notes on application of sealant to cylinder head gasket | ENGINE 113 | AH01.30-P-1000-04V | |
| Notes on application of sealant to cylinder shutoff oil pump | ENGINE 137.970 | AH01.30-P-1000-01A | |
| Notes on application of sealant to end cover with radial shaft seal | ENGINE 642 in MODEL 211.020 /022 /084 /089 /220 /222 /284 /289 | AH01.40-P-1000-06TI | |
| Notes on application of sealant to front cover at cylinder head | ENGINE 275 | AH01.30-P-1000-02C | |
| Notes on application of sealant to front cover at cylinder head | ENGINE 668.914 /940 /941 /942 | AH01.30-P-1000-02A | |
| Notes on application of sealant to front cover of cylinder head | ENGINE 629 | AH01.30-P-1000-02TJ | |
| Notes on application of sealant to front cover of the cylinder head | ENGINE 640 in MODEL 169, 245 | AH01.30-P-1000-02AL | |
| Notes on application of sealant to oil pan | ENGINE 137.970, 275 | AH01.45-P-0001-01A | |
| Notes on application of sealant to oil pan | ENGINE 629 | AH01.45-P-0001-01TJ | |
| Notes on application of sealant to oil pan | ENGINE 272 in MODEL 164, 251 | AH01.45-P-0001-01GZA | |
| Notes on application of sealant to oil pan | ENGINE 113.963 /967 /968 /987 /988 /989 /990 /991 /992 /995 | AH01.45-P-0001-01R | |
| Notes on application of sealant to oil pan | ENGINE 273 | AH01.45-P-0001-01SX | |
| Notes on application of sealant to oil pan | ENGINE 628.960 /962 /963 | AH01.45-P-0001-01M | |
| Notes on application of sealant to oil pan | ENGINE 134.9, 135.9 in MODEL 454.0 | AH01.45-P-0001-01FF | |
| Notes on application of sealant to oil pan | ENGINE 166.940 /960 /961 /990 /991 /995, 668.914 /940 /941 /942 | AH01.45-P-0001-01F | |
| Notes on application of sealant to oil pan | ENGINE 155 in MODEL 199 | AH01.45-P-0001-01SLR | |
| Notes on application of sealant to oil pan | ENGINE 160, 660... | AH01.45-P-0001-01SM | |
| Notes on application of sealant to oil pan | ENGINE 285 | AH01.45-P-0001-01H | |
| Notes on application of sealant to oil pan | ENGINE 112... | AH01.45-P-0001-01PV | |
| Notes on application of sealant to oil pan | ENGINE 122.9 in MODEL 454.0 | AH01.45-P-0001-01FB | |
| Notes on application of sealant to oil pan | ENGINE 113, 156... | AH01.45-P-0001-01GZ | |
| Notes on application of sealant to oil pan | ENGINE 640 in MODEL 169, 245 | AH01.45-P-0001-01AL | |
| Notes on application of sealant to oil pan | ENGINE 266.920 /940 /960 /980 in MODEL 169.0 /3, 245.2 | AH01.45-P-0001-01AK | |
| Notes on application of sealant to oil pan | ENGINE 156... | AH01.45-P-0001-01AMG | |
| Notes on application of sealant to oil pan | ENGINE 272, 273... | AH01.45-P-0001-01TZ | |
| Notes on application of sealant to oil pan | ENGINE 271 | AH01.45-P-0001-01T | |
| Notes on application of sealant to oil pan | ENGINE 272 | AH01.45-P-0001-01VB | |
| Notes on application of sealant to oil pan | ENGINE 272 in MODEL 203.08 /28 /09 /29, 211.08 /28 /09 /29 ENGINE 273 in MODEL 211.09 /29 | AH01.45-P-0001-01TW | |
| Notes on application of sealant to rear cover at cylinder head | ENGINE 668.914 /940 /941 /942 | AH01.30-P-1000-03A | |
| Notes on application of sealant to right-hand crankcase | ENGINE 137.970 | AH01.40-P-1000-02A | |
| Notes on application of sealant to the timing case cover | ENGINE 266.920 /940 /960 /980 in MODEL 169.0 /3, 245.2 | AH01.40-P-1000-01AK | |
| Notes on application of sealant to the timing case cover | ENGINE 611, 612, 613, 646, 647, 648... | AH01.40-P-1000-01E | |
| Notes on application of sealant to timing case cover | ENGINE 166.940 /960 /961 /990 /991, 668.914 /940 /941 /942 | AH01.40-P-1000-01D | |
| Notes on application of sealant to timing case cover | ENGINE 640 | AH01.40-P-1000-01AL | |
| Notes on application of sealant to timing case cover | ENGINE 137.970 | AH01.40-P-1000-01A | |
| Notes on application of sealant to timing case cover | ENGINE 642 in MODEL 211.020 /022 /084 /089 /220 /222 /284 /289 /620 | AH01.40-P-1000-01TI | |
| Notes on application of sealant to timing case cover | ENGINE 642 in MODEL 219.322 | AH01.40-P-1000-01TQ | |
| Notes on application of sealant to timing case cover | ENGINE 134.9, 135.9 in MODEL 454.0 | AH01.40-P-1000-01FF | |
| Notes on application of sealant to timing case cover | ENGINE 156 | AH01.40-P-1000-01AMG | |
| Notes on application of sealing compound to front cover at cylinder head | ENGINE 275 | AH01.30-P-1000-02D | |
| Notes on application of sealing compound to oil pan | ENGINE 113.941 /942 /960 /962 /965 /981 /982 /993 | AH01.45-P-0001-01E | |
| Notes on application of sealing compound to rear cover at cylinder head | ENGINE 640 in MODEL 169 | AH01.30-P-1000-03AL | |
| Notes on application of sealing compound to timing case cover | ENGINE 639.939 in MODEL 454.0 | AH01.40-P-1000-01FG | |
| Notes on assigning the cylinder head gaskets | ENGINE 642 | AH01.30-P-1000-06TI | |
| Notes on position of engine number | MODEL 450.3 /4, 452.3 /4, 454.0 | AH01.00-P-0001-01FF | |
| Notes on position of engine number | ENGINE 132.9, 660.9 in MODEL 451.3 /4 | AH01.00-P-0001-01MCC | |
| Notes on position of engine number | ENGINE 112, 113, 120, 137, 271, 272, 273, 275, 285, 628, 629, 642, 651 | AH01.00-P-0001-01D | |
| Notes on sealant path for a cylinder crankcase | ENGINE 157, 276, 278 | AH01.40-P-1000-08MM | |
| Notes on sealant path for cylinder head cover | ENGINE 642 in MODEL 207, 212, 218, 221 | AH01.30-P-1000-08SXI | |
| Notes on sealant path for cylinder head cover | ENGINE 157, 276, 278 | AH01.30-P-1000-08MM | |
| Notes on sealant path for cylinder head cover | ENGINE 642.970 in MODEL 463 ENGINE 642.975 /884 in MODEL 461 | AH01.30-P-1000-08GY | |
| Notes on sealant path for front cover to cylinder head | ENGINE 611, 612, 613, 628, 646, 647, 648... | AH01.30-P-1000-02B | |
| Notes on sealant path for front cover to cylinder head | ENGINE 272, 273 | AH01.30-P-1000-02V | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 157, 276, 278 | AH01.30-P-1000-02MM | |
| Notes on sealant path for oil pan | ENGINE 273 | AH01.45-P-0001-01SY | |
| Notes on sealant path for oil pan | ENGINE 156 in MODEL 230.470 | AH01.45-P-0001-01RMG | |
| Notes on sealant path for oil pan | ENGINE 276 | AH01.45-P-0001-01MMA | |
| Notes on sealant path for oil pan | ENGINE 157, 278 | AH01.45-P-0001-01MMB | |
| Notes on sealant path for oil pan | ENGINE 272 | AH01.45-P-0001-01VA | |
| Notes on sealant path for oil pan | ENGINE 132.9 in MODEL 451.3 /4 | AH01.45-P-0001-01MCC | |
| Notes on sealant path for oil pan | ENGINE 651 in MODEL 204, 207, 212, 218, 221 | AH01.45-P-0001-01CD | |
| Notes on sealant path for oil pan | ENGINE 642 | AH01.45-P-0001-01OM | |
| Notes on sealant path for oil pan | ENGINE 156 in MODEL 204.077 /277 | AH01.45-P-0001-01CMG | |
| Notes on sealant path for timing case cover | ENGINE 132.9 in MODEL 451.3 /4 | AH01.40-P-1000-01MCC | |
| Notes on sealant path for timing case cover | ENGINE 159 | AH01.40-P-1000-01RQ | |
| Notes on sealant path for timing case cover | ENGINE 276 | AH01.40-P-1000-01MMA | |
| Notes on sealant path for timing case cover | ENGINE 271 ENGINE 271.951 in MODEL 906 | AH01.40-P-1000-01TK | |
| Notes on sealant path for timing case cover | ENGINE 660.9 in MODEL 451.3 /4 | AH01.40-P-1000-01MCD | |
| Notes on sealant path for timing case cover | ENGINE 272, 273 | AH01.40-P-1000-01VA | |
| Notes on sealant path for timing case cover | ENGINE 651 | AH01.40-P-1000-01CD | |
| Notes on sealant path for timing case cover | ENGINE 642.970 in MODEL 463 ENGINE 642.975 /884 in MODEL 461 | AH01.40-P-1000-01GY | |
| Notes on sealant path for timing case cover | ENGINE 642 in MODEL 207, 212, 218, 221 | AH01.40-P-1000-01SXI | |
| Notes on sealant path for timing case cover | ENGINE 157, 278 | AH01.40-P-1000-01MMB | |
| Notes on the application of sealant to the cylinder head cover | ENGINE 122.9 in MODEL 454.0 | AH01.30-P-1000-08FB | |
| Notes on the application of sealing compound to the cylinder head cover | ENGINE 273 | AH01.30-P-1000-08SX | |
| Notes on the application of sealing compound to the cylinder head cover | ENGINE 642 in MODEL 219.322 | AH01.30-P-1000-08TQ | |
| Notes on the application of sealing compound to the cylinder head cover | ENGINE 642 in MODEL 164, 203, 209, 251.0 /1 | AH01.30-P-1000-08PI | |
| Notes on the application of sealing compound to the cylinder head cover | ENGINE 266.980 in MODEL 169.0 /3, 245.2 | AH01.30-P-1000-08BK | |
| Notes on the application of sealing compound to the cylinder head cover | ENGINE 266.920 /940 /960 in MODEL 169.0 /3, 245.2 | AH01.30-P-1000-08AK | |
| Notes on the application of sealing compound to the cylinder head cover | ENGINE 642 | AH01.30-P-1000-08TI | |
| Notes on the sealant process for the end cover with radial shaft seal | ENGINE 166.940 /960 /961 /990 /995 /991, 668.914 /940 /941 /942 | AH01.40-P-1000-06C | |
| Use of engine no. when installing reconditioned engines and factory-new replacement engines or crankcases | ENGINE all | AH01.10-P-0001-01A | |
| Use of unleaded fuel in reconditioned engines | ENGINE 102, 110, 115, 116, 117... | AH01.10-P-1000-01A |