LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2010 >> CL65 >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Wheels, Chassis Alignment Check -- Testing & Repair -- E550 (211.090)) >> Testing & Repair >> Carry out distance and comparative measurements on front and rear axles - AR40.30-P-0402T

Carry out distance and comparative measurements on front and rear axles - AR40.30-P-0402T

WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 211, 219 

Front axle on model 211 without 4MATIC 

Fig 1: Checking Bores For Mount (Front Axle Without 4MATIC)
G07196531Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Rear axle on model 211 without 4MATIC 

Fig 2: Checking Bores For Mount (Front Axle With 4MATIC)
G07196532Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
MODIFICATION NOTES

17.8.04 Dimension H7 and H9 revised. *BE40.30-P-1001-05B 
Dimension V8, V9 and V10 revised. *BE40.30-P-1001-06D 
MEASURING Measure     
1 Observe preparation for distance dimension and comparative measurement   AR40.30-P-0401T 
2 Carrying out distance and comparative measurements on front axle In the case of front end damage
IMPORTANT Depending on the accident damage, further individual measuring points can be defined for a comparative measurement.
 
Model 211 except 4MATIC model 219 AR40.30-P-0402-01T
Check values model 211 *BE40.30-P-1001-06D 
Check values model 219 *BE40.30-P-1001-06E 
SPECIAL TOOL *170589006300
SPECIAL TOOL *124589021900
SPECIAL TOOL *124589011900
SPECIAL TOOL *124589086300
SPECIAL TOOL *168589076300
Model 211 with 4MATIC AR40.30-P-0402-01VM 
Check values *BE40.30-P-1001-06D 
SPECIAL TOOL *170589006300
SPECIAL TOOL *124589021900
SPECIAL TOOL *124589011900
SPECIAL TOOL *124589086300
SPECIAL TOOL *168589076300
3 Carry out distance and comparative measurements on rear axle For rear end damage
IMPORTANT Depending on the accident damage, further individual measuring points can be defined for a comparative measurement.
AR40.30-P-0402-02T 
Check values model 211 *BE40.30-P-1001-05B 
Check values model 219 *BE40.30-P-1001-05F 
SPECIAL TOOL *170589006300
SPECIAL TOOL *124589021900
SPECIAL TOOL *124589011900
SPECIAL TOOL *124589086300
SPECIAL TOOL *168589076300
TEST VALUES FOR DISTANCE AND COMPARATIVE MEASUREMENTS ON REAR AXLE

Number Designation Model 211
BE40.30-P-1001-05B Dimension H1 mm -
H2 mm 3
H4 mm -
H5 mm 6
H6 mm 1032 (±2)
H7 mm 1036 (±2)
H8 mm -
H9 mm 1175 (±2)
See picture AR40.30-P-0402-02T 
TEST VALUES FOR DISTANCE AND COMPARATIVE MEASUREMENTS ON REAR AXLE

Number Designation Model 219
BE40.30-P-1001-05F Dimension H1 mm -
H2 mm 3
H4 mm -
H5 mm 6
H6 mm 1032 (±2)
H7 mm 1036 (±2)
H8 mm -
H9 mm 1175 (±2)
See picture   AR40.30-P-0402-02T 
TEST VALUES FOR DISTANCE AND COMPARATIVE MEASUREMENT ON FRONT AXLE

Number Designation Model 211 except 211.08/09/28/29 Model 211.08/09/28/29
BE40.30-P-1001-06D Dimension V1 mm 4 4
V2 mm 4 4
V3 mm 3 -
V5 mm - -
V6 mm 3 -
V7 mm - -
V8 mm 834 (±2) 833 (±2)
V9 mm 856 (±2) 856 (±2)
V10 mm 966 (±2) 966 (±2)
See picture AR40.30-P-0402-01T AR40.30-P-0402-01T
TEST VALUES FOR DISTANCE AND COMPARATIVE MEASUREMENT ON FRONT AXLE

Number Designation Model 219
BE40.30-P-1001-06E Dimension V1 mm 4
V2 mm 4
V3 mm 3
V5 mm -
V6 mm 3
V7 mm -
V8 mm 834 (±2)
V9 mm 856 (±2)
V10 mm 966 (±2)
See picture AR40.30-P-0402-01T
Fig 3: Identifying Telescopic Measuring Rod (124 589 01 19 00)
G07196533Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 4: Identifying Telescopic Measuring Rod (124 589 02 19 00)
G07196534Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 5: Identifying Mount (170 589 00 63 00)
G07196535Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 6: Identifying Set Of Measurement Fixtures (168 589 07 63 00)
G07196536Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 7: Identifying Connecting Pieces (124 589 08 63 00)
G07196537Courtesy of MERCEDES-BENZ OF NORTH AMERICA.