Remove/install rear axle brake caliper - AR42.10-P-0080SX
MODEL 216
MODEL 221
1-piston brake caliper
4-piston brake caliper
| Remove/install | |||
|---|---|---|---|
| Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| 1 | Remove brake pads on rear axle | with 1-piston brake caliper | AR42.10-P-0160SX |
| with 4-piston brake caliper | AR42.10-P-0161SX | ||
| 2 | Remove bolt (1) and remove right rear brake pad contact sensor connector (S10/4x1) from brake caliper (2) | When removing the right brake caliper (2) | |
| *BA42.10-P-1002-12M | |||
| 3 | Remove brake hose (3) | AR42.10-P-0013SX | |
| 4.1 | Remove bolts (4a) and detach brake caliper support (4) from wheel carrier (5) | When replacing the 1-piston brake caliper (2) | |
| *BA42.10-P-1004-12M | |||
| 4.2 | Remove bolts (2a) and detach brake caliper (2) from wheel carrier (5) | With 4-piston brake caliper (2) | |
| *BA42.10-P-1004-12M | |||
| 5 | Install in the reverse order |
REAR AXLE BRAKE CALIPER
| Number | Designation | Model 216 except 216.374/ 377/379 | Model 216.374/ 377/379 | |
|---|---|---|---|---|
| BA42.10-P-1002-12M | Bolt, brake pad contact sensor to brake caliper | Nm | 8 | 8 |
| BA42.10-P-1004-12M | Self-locking bolt, brake caliper to wheel carrier | Nm | 110 | 110 |