Replace brake hoses - AR42.10-P-0013CW

MODEL 204 

Rear brake hose 

Fig 1: Identifying Rear Brake Hose And Brake Line

Courtesy of MERCEDES-BENZ USA

Front brake hose, model 204.0/2/3 

Fig 2: Identifying Front Brake Hose, Brake Line And Rubber Protective Ring

Courtesy of MERCEDES-BENZ USA

Front brake hose, model 204.9 

Fig 3: Identifying Front Brake Hose, Brake Line, Electrical Line, Clip And Bracket

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of poisoning  caused by swallowing brake fluid. Risk of injury  caused by brake fluid coming into contact with skin and eyes.	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Brake fluid notes		AH42.50-P-0001-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
	Notes on installing brake hoses		AH42.10-P-9406-01A
1	Remove wheel. Remove/install wheels, rotate if necessary		AP40.10-P-4050CW
2	Detach brake line (5) from brake hose (51)	Seal off line connections immediately with plugs. The expansion reservoir for brake fluid must not run completely empty.	Fig 4
			*BA42.10-P-1001-04L
3.1	Guide brake hose (51) through the rubber protective ring (51a)	Model 204.0/2/3 on the front axle
3.2	Detach brake hose (51) from bracket (51b), to do so unhook electrical lines (3) and open clip (4)	Model 204.9 at front axle
4	Detach brake hose (51) from brake caliper and remove		Fig 5
			Fig 4
			*BA42.10-P-1002-04L
5	Install in the reverse order
6	Bleed brake system		AR42.10-P-0010CW
7	Check brake system for leaks		AR42.10-P-0100-01V

Fig 4: Identifying Box Wrench Bit (000 589 75 03 00)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Ring Wrench (000 589 76 03 00)

Courtesy of MERCEDES-BENZ USA