Retrofit AMG trim parts - AZ88.00-P-0001Q
MODEL 211.0
MODEL 211.2 except CODE (550) Trailer hitch
| The paneling parts in the accessories and parts kit scope of delivery are primed and should be painted to match the color of the car before installation. | |||
| Front AMG license plate molding is not included in scope of delivery! Must be ordered separately depending on specific national version. It is also necessary to order the plastic cover on the rear apron separately. |
|||
| Model 211.2 The surface of the existing PTS sensors must be painted prior to installing the PTS sensors in the rear bumper. For this purpose, adapt color of PTS sensor to bottom section paneling (black covering). Maximum layer thickness is 120 μm. |
|||
| After conversion, have proper installation confirmed by authorized workshop on form sheet "Excerpt from EU Type Approval". The form sheet is to be kept in the vehicle and to be handed over to the responsible persons if required. | |||
| Body kit, certificate | Model 211.004/006/016/020/022/023/026/028/029/042/054/056/061/065/070/080/082/083/084/087/089/092/206/216/220/222/223/226/242/254/256/261/265/270/280/282/283/284/287/289/292 * For Germany only |
OF88.00-P-1000-01KA | |
| Removal | |||
| 1 | Remove front bumper | ||
| AR88.20-P-2000T | |||
| 2 | Remove rear bumper | ||
| Model 211.0. | AR88.20-P-2200T | ||
| Model 211.2. | AR88.20-P-2200TA | ||
| Installation | |||
| 3 | Converting front bumper | up to 31.5.06. | AZ88.00-P-0001-02P |
| As of 1.6.06. | AZ88.00-P-0001-02PA | ||
| 4 | Converting side paneling | AZ88.00-P-0001-04P | |
| 5 | Converting rear bumper | Model 211.0 up to 31.5.06 | AZ88.00-P-0001-03P |
| Model 211.0 as of 1.6.06. | AZ88.00-P-0001-03PA | ||
| Model 211.2. | AZ88.00-P-0001-03TA | ||
| 6 | Install front bumper | ||
| AR88.20-P-2000T | |||
| 7 | Install rear bumper | ||
| Model 211.0. | AR88.20-P-2200T | ||
| Model 211.2. | AR88.20-P-2200TA | ||
| 8.1 | Retrofit AMG rear spoiler | Model 211.0. | AZ88.50-P-0001T |
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| B6 603 64 56 | Complete front bumper (as of 1.6.06) | 1 |
| A211 817 07 78 | AMG license plate molding ECE/Australia (not included in bumper kit) | 1 |
| A211 817 09 78 | AMG license plate molding Switzerland (not included in bumper kit) | 1 |
| A211 817 08 78 | AMG license plate molding Italy (not included in bumper kit) | 1 |
| A211 817 10 78 | AMG license plate molding Japan (not included in bumper kit) | 1 |
| A211 817 11 78 | AMG license plate USA (not included in bumper kit) | 1 |
| B6 603 64 57 | Complete front bumper with PTS (as of 1.6.06) | 1 |
| A211 817 07 78 | AMG license plate molding ECE/Australia (not included in bumper kit) | 1 |
| A211 817 09 78 | AMG license plate molding Switzerland (not included in bumper kit) | 1 |
| A211 817 08 78 | AMG license plate molding Italy (not included in bumper kit) | 1 |
| A211 817 10 78 | AMG license plate molding Japan (not included in bumper kit) | 1 |
| A211 817 11 78 | AMG license plate USA (not included in bumper kit) | 1 |
| B6 603 64 58 | Complete front bumper with HCS (as of 1.6.06) | 1 |
| A211 817 07 78 | AMG license plate molding ECE/Australia (not included in bumper kit) | 1 |
| A211 817 09 78 | AMG license plate molding Switzerland (not included in bumper kit) | 1 |
| A211 817 08 78 | AMG license plate molding Italy (not included in bumper kit) | 1 |
| A211 817 10 78 | AMG license plate molding Japan (not included in bumper kit) | 1 |
| A211 817 11 78 | AMG license plate USA (not included in bumper kit) | 1 |
| B6 603 64 59 | Complete front bumper with HCS/PTS (as of 1.6.06) | 1 |
| A211 817 07 78 | AMG license plate molding ECE/Australia (not included in bumper kit) | 1 |
| A211 817 09 78 | AMG license plate molding Switzerland (not included in bumper kit) | 1 |
| A211 817 08 78 | AMG license plate molding Italy (not included in bumper kit) | 1 |
| A211 817 10 78 | AMG license plate molding Japan (not included in bumper kit) | 1 |
| A211 817 11 78 | AMG license plate USA (not included in bumper kit) | 1 |
| B6 603 61 43 | Complete front bumper (up to 31.5.06) | 1 |
| A211 885 13 81 | AMG license plate molding ECE/Australia (not included in bumper kit) | 1 |
| A211 885 15 81 | AMG license plate molding Switzerland (not included in bumper kit) | 1 |
| A211 885 14 81 | AMG license plate molding Italy (not included in bumper kit) | 1 |
| A211 885 16 81 | AMG license plate molding Japan (not included in bumper kit) | 1 |
| A211 885 17 81 | AMG license plate USA (not included in bumper kit) | 1 |
| B6 603 61 44 | Complete front bumper with HCS (up to 31.5.06) | 1 |
| A211 885 13 81 | AMG license plate molding ECE/Australia (not included in bumper kit) | 1 |
| A211 885 15 81 | AMG license plate molding Switzerland (not included in bumper kit) | 1 |
| A211 885 14 81 | AMG license plate molding Italy (not included in bumper kit) | 1 |
| A211 885 16 81 | AMG license plate molding Japan (not included in bumper kit) | 1 |
| A211 885 17 81 | AMG license plate USA (not included in bumper kit) | 1 |
| B6 603 61 45 | Complete side paneling set | 1 |
| Model 211.0 | ||
| B6 603 64 60 | Complete rear bumper (with cutout for standard rear muffler, except code 952) (as of 1.6.06) | 1 |
| A211 885 48 25 | Bottom section paneling (not included in parts set) | 1 |
| B6 603 64 61 | Complete rear bumper with PTS (with cutout for standard rear muffler, except code 952) (as of 1.6.06) | 1 |
| A211 885 48 25 | Bottom section paneling (not included in parts set) | 1 |
| B6 603 64 62 | Complete rear bumper (with cutout for E 63 AMG rear muffler) (as of 1.6.06) | 1 |
| A211 885 50 25 | Bottom section paneling (not included in parts set) | 1 |
| B6 603 64 63 | Complete front with PTS (with cutout for E 63 AMG rear muffler) (as of 1.6.06) | 1 |
| A211 885 50 25 | Bottom section paneling (not included in parts set) | 1 |
| B6 603 61 46 | Complete rear bumper (with cutout for standard rear muffler, except code 952) (up to 31.5.06) | 1 |
| B6 603 61 47 | Complete rear bumper (with cutout for E 55 AMG rear muffler) up to 31.5.06) | 1 |
| A211 885 13 25 | Bottom section paneling (not included in parts set) | 1 |
| Model 211.2 | ||
| B6 603 61 53 | Rear bumper, complete (with cutout for standard rear muffler, except code 952) | 1 |
| A211 885 15 25 | Bottom section paneling without PTS (not included in parts kit) | 1 |
| A211 885 18 25 | Bottom section paneling with PTS (not included in parts kit) | 1 |
| A001 542 74 18 9979 | PTS sensor, painted (only on vehicles with PTS, not included in parts kit) | 4 |
| B6 603 61 54 | Rear bumper, complete (with cutout for E 55 AMG rear muffler) | 1 |
| A211 885 17 25 | Bottom section paneling without PTS (not included in parts kit) | 1 |
| A211 885 20 25 | Bottom section paneling with PTS (not included in parts kit) | 1 |
| A001 542 74 18 9979 | PTS sensor, painted (only on vehicles with PTS, not included in parts kit) | 4 |
| A211 790 04 88 | Rear spoiler (order with ES2 paint code, see EPC) | 1 |