Optical alarm, function - GF80.50-P-4006TA

MODEL 211.0/2 with code (551a) Anti-theft alarm system (ATA) with code (491) USA version 

Optical alarm 

All optical signals are output by the vehicle lighting

The alarm output is controlled by the rear SAM control module with fuse and relay module (N10/2). Type and duration of the alarm are stored as performance maps in the rear SAM control module with fuse and relay module (N10/2).

The ATA alarm requests have priority over all normal light requests.

Alarm output 

The optical signals are output via:

• Taillamp, parking lamp, left outer rear fog lamp (E3e2) (only on model 211.0),
• Taillamp, parking lamp, right outer rear fog lamp (E4e2) (only on model 211.0),
• Taillamp, left inner rear fog lamp (E3e5) (only on model 211.0),
• Taillamp, right inner rear fog lamp (E4e5) (only on model 211.0),
• Stop lamp, taillamp and left parking lamp (E3e9) (only on model 211.2),
• Stop lamp, taillamp and right parking lamp (E4e9) (only on model 211.2),
• Left fog lamp (E5/1),
• Right fog lamp (E5/2) and
• Front dome lamp (N70e1.