LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2009 >> CL600 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control -- Cl600 (216.376) >> Testing & Repair >> Remove/install actuator motor for right defroster vent flap - AR83.10-P-2005SX

Remove/install actuator motor for right defroster vent flap - AR83.10-P-2005SX

MODEL 216.3, 221.0/1 

Shown on model 221 

Fig 1: Identifying Remove/Install Components Of Actuator Motor For Right Defroster Flap
G07542933Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove instrument panel Model 216 AR68.10-P-1000SC
    Model 221 AR68.10-P-1000SX
2 Fold damping mat (1) upwards    
3 Remove bolt (2) and remove air duct (3)    
4 Remove right defroster vent flap actuator motor (M2/9) from air conditioner housing IMPORTANTInstallation  : When replacing, match the position of the right defroster flap input shaft to the position of the actuating drive on the right defroster vent flap actuator motor (M2/9).  
5 Install in the reverse order    
6 Teach in and normalize right defroster vent flap actuator motor (M2/9) IMPORTANT Menu item: Control unit adaptations, teach in actuator motors, normalize actuator motors.  
REFER TO SELF-DIAGNOSTIC SYSTEMS Connect STAR DIAGNOSIS and read out fault memory   AD00.00-P-2000-04A
    STAR DIAGNOSIS diagnostic system *WH58.30-Z-1048-13A 
COMMERCIALLY AVAILABLE TOOLS

Number Designation  
WH58.30-Z-1048-13A STAR DIAGNOSIS diagnostic system, Compact Passenger Car 6511 1801 00