Remove/install passenger airbag unit - AR91.60-P-0680SX

MODEL 216.3, 221.0/1 

Fig 1: Identifying Passenger Airbag Unit Remove/Install Components - Shown On Model 221

Courtesy of MERCEDES-BENZ USA

Shown on model 221 

	Remove/install
	Risk of injury  caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.	AS91.00-Z-0001-01A
	Notes on performing repair, body work and welding on vehicles with airbags and ETR units		AH91.00-P-0002-01M
	Assessment of airbag and belt tensioner units in accident vehicles		AH91.00-P-0006-01B
	Legal regulations on handling and storing airbags and emergency tensioning retractors		AH91.00-P-0004-01A
1	Instrument panel (4) removal	Model 216	AR68.10-P-1000SC
		Model 221	AR68.10-P-1000SX
2	Remove nuts (2) and remove front passenger airbag unit (1) from instrument panel (4)		*BA91.60-P-1007-01L
3	Detach mounting console (3) from front passenger airbag unit (1)	If the front passenger airbag unit (1) is replaced, the faulty front passenger airbag unit (1) must be properly disposed of. Refer to: ↓	*BA91.60-P-1004-01L
		Notes on disposing of airbag and emergency tensioning retractor units	OS91.00-P-0001-01A
4	Install in the reverse order
5.1	Check supplemental restraint system (SRS) with STAR DIAGNOSIS	After replacing front passenger airbag unit (1).
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A

AIRBAG

Number	Designation		Model 216	Model 221
BA91.60-P-1004-01L	Nut of mounting console to front passenger airbag unit	Nm	7	7
BA91.60-P-1007-01L	Nut, front passenger airbag unit to instrument panel	Nm	7	7

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnosis system, Compact Passenger Car	6511 1801 00