Oil pan - BA01.45-P-1000-01Q
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.
Engine 642
MODIFICATION NOTES
| 13.4.10 | Value modified: Oil suction pipe on oil pan and cylinder head cover |
OIL PAN
| Number | Designation | Engine 642 | ||
|---|---|---|---|---|
| BA01.45-P-1001-01Q | Oil pan top section to cylinder block top at front | M6 | Nm | 14 |
| BA01.45-P-1002-01Q | Oil pan top section to cylinder crankcase on transmission side | M8 | Nm | 20 |
| BA01.45-P-1003-01Q | Oil pan bottom section to oil pan top section | M6 | Nm | 14 |
| BA01.45-P-1004-01Q | Bracket on top part of oil pan | M6 | Nm | 14 |
| M8 | Nm | 20 | ||
| BA01.45-P-1005-01Q | Oil suction pipe on oil pan and cylinder head cover | M6 | Nm | 14 |
| BA01.45-P-1006-01Q | Oil drain screw to oil pan | M12 | Nm | 30 |
| M24 | Nm | 45 | ||
| BA01.45-P-1007-01Q | Bolt, oil pan to cylinder crankcase | M6 | Nm | 14 |
| M8 | Nm | 20 | ||
| M10 | Nm | - | ||
| BA01.45-P-1008-01Q | Bolt, oil pan to timing case cover | M6 | Nm | 14 |
| BA01.45-P-1009-01Q | Bolt, oil pan to crankshaft housing sealing at the rear | M6 | Nm | 14 |
| BA01.45-P-1010-01Q | Bolt, dipstick guide tube to oil pan/front axle housing | M6 | Nm | 12 |
| BA01.45-P-1011-01Q | Bolt, oil line bracket to oil pan | M6 | Nm | 11 |
| BA01.45-P-1012-01Q | Bolt, oil dipstick guide tube to muffler bracket | M6 | Nm | 14 |
| BA01.45-P-1013-01Q | Oil suction pipe to oil pan | M6 | Nm | 14 |