Crankcase, timing case cover, end cover - BA01.40-P-1000-01S

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.

Engine 642

MODIFICATION NOTES

13.4.10

Value modified: Bolt for timing case cover on crankcase

CRANKCASE, TIMING CASE COVER, END COVER

Number	Designation				Engine 642
BA01.40-P-1001-01S	Bolt for rear end cover on crankcase		Stage 1	Nm	8
BA01.40-P-1001-01S	Bolt for rear end cover on crankcase		Stage 2	∠°	10
BA01.40-P-1002-01S	Bolt for front end cover on crankcase			Nm	9
BA01.40-P-1003-01S	Bolt for bottom section of crankcase	M6		Nm	8.5
		M8		Nm	20
		M11	Stage 1	Nm	20
			Stage 2	Nm	50
			Stage 3	∠°	90
			Stage 4	∠°	90
BA01.40-P-1004-01S	Bolt for timing case cover on crankcase	M6		Nm	10
BA01.40-P-1005-01S	Screw plug for water feed for water jacket on left	M24x1.5		Nm	45
BA01.40-P-1006-01S	Screw plug for pressure oil feed upstream of oil filter on outside	M18x1.5		Nm	30
BA01.40-P-1007-01S	Screw plug for balance shaft at the front	M20x1.5		Nm	35
BA01.40-P-1007-01S	Screw plug for balance shaft at the front	M18x1.5		Nm	30
BA01.40-P-1008-01S	Screw plug for balance shaft at the rear	M20x1.5		Nm	35
BA01.40-P-1009-01S	Bolt for oil spray nozzle			Nm	8