LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL450 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Complete Engine - 164 Chassis -- Diesel) >> Testing & Repair >> Remove/install cylinder head - AR01.30-P-5800GZC >> Pull out guide rail pins at cylinder head - AR01.30-P-5800-04PI

Pull out guide rail pins at cylinder head - AR01.30-P-5800-04PI

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Threaded Pin (116 589 01 34 00)
G07252915Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 2: Identifying Impact Extractor (116 589 20 33 00)
G07252916Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 3: Identifying Extractor (605 589 00 33 00)
G07252917Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. 1.1 Pull out guide rail pin (7) together with threaded bolt SPECIAL TOOL and impact extractor SPECIAL TOOL .

    IMPORTANT Also screw threaded bolt SPECIAL TOOL into guide rail pin (7) and extract using impact extractor SPECIAL TOOL .

  2. 1.2 Pull out guide rail pin (7) using extractor SPECIAL TOOL .
    Fig 4: Identifying Guide Rail Pins
    G07007972Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals