Checking cylinder head bolts - AR01.30-P-5800-03PI
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD/CYLINDER HEAD BOLTS
| Number | Designation | Engine 642 | ||
|---|---|---|---|---|
| BE01.30-P-1001-04A | Cylinder head bolt | Thread diameter | M | 12 |
| Length (L) when new | mm | 205 | ||
| max. length (L) | mm | 207 | ||
| See picture in | - | |||
- Measure length (L).
The cylinder head bolts must be replaced if the maximum length (L) of the cylinder head bolts is exceeded.