Remove/install backup camera - AR54.65-P-0030GZ

MODEL 164, 251 with CODE (218) Backup camera

Illustrated on model 251

Fig 1: Identifying Backup Camera Remove/Install Components

G05259112

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/instal
1	Remove liner on tailgate	Model 164	AR72.20-P-3520GZ
		Model 251	AR72.20-P-3520RT
2	Remove tailgate handle	Model 164	AR72.20-P-3650GZ
		Model 251	AR72.20-P-3650RT
3	Separate backup camera connector (B84/3x1) and loosen clip (1) from rear-end door	The clip (1) must be twisted for this.
4	Press in clip (2) and remove the backup camera (B84/3) with bracket (3) outwards from the rear-end door
5	Install in the reverse order
6	Calibration of backup camera (B84/3)	On Japan version vehicles, code 498. If only the backup camera (B84/3) was removed, the steering angle sensor does not have to be calibrated.	AR54.65-P-0022GZ