Remove/install Parktronic system (PTS) sensors in rear bumper - AR54.65-P-0002GZ
MODEL 164 with CODE (220) Parktronic System (PTS)
| Remove/instal | |||
|---|---|---|---|
| 1 | Remove rear bumper | AR88.20-P-2200GZ | |
| 2 | Disconnect electrical connector (1) | ||
| 3 | Unlock the corresponding circlip (2) using the unlocking tool | Figure | |
| 4 | Remove the outer right rear PTS ultrasonic sensor (B8/7) or inner right rear PTS ultrasonic sensor (B8/8) or inner left rear PTS ultrasonic sensor (B8/9) or outer left rear PTS ultrasonic sensor (B8/10) from the bumper | ||
| 5 | Install in the reverse order |