LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL320 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine -- Testing & Repair -- 164 Chassis - 2 Of 2) >> Testing & Repair >> Measure cylinder bores - AR01.40-P-9202 >> Measure cylinder bores - AR01.40-P-9202AMG (ML63 AMG)

Measure cylinder bores - AR01.40-P-9202AMG (ML63 AMG)

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 156 

Fig 1: Identifying Measuring Points Of Cylinder Bore
G04958187Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Figure item, etc. Work instructions    
SPECIAL TOOL Dial gauge   Fig 2
COMMERCIALLY AVAILABLE TOOLS Quick calipers for internal measurements    
COMMERCIALLY AVAILABLE TOOLS Internal measuring instrument    
1, 2, 3 Cylinder bore measuring points IMPORTANT Measure diameter of cleaned cylinder bores with an inside caliper in a longitudinal and transverse direction.  
    Cylinder Ø *BE01.40-P-1001-01N 
CHECK VALUES FOR CYLINDER BORE

Number Designation Engine 156
BE01.40-P-1001-01N Cylinder Ø mm 102.200 to 102.215
Fig 2: Identifying Dial Indicator (001 589 53 21 00)
G04958188Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals