Crankshaft - BA03.20-P-1000-01J

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.

Engine 156

CRANKSHAFT BEARING CAP

Number	Designation				Engine 156
BA03.20-P-1001-01J	Bolt for crankshaft bearing cap (lower section of cylinder crankcase/main bearing threaded connection)	M9	Stage 1	Nm	20
			Stage 2	Nm	32
			Stage 3	∠°	90
			Stage 4	∠°	90
			Stage 5		release
			Stage 6	Nm	20
		Stage 7		Nm	32
		Stage 8		∠°	90
		Stage 9		∠°	90
		M10	Stage 1	Nm	20
			Stage 2	Nm	40
			Stage 3	∠°	90
			Stage 4	∠°	90
			Stage 5	release
			Stage 6	Nm	20
			Stage 7	Nm	40
			Stage 8	∠°	90
			Stage 9	∠°	90
BA03.20-P-1003-01J	Bearing bolt on crankcase at the front for chain drive			Nm	20
BA03.20-P-1004-01J	Axle journal on crankcase at the front for chain drive			Nm	30
BA03.20-P-1005-01J	Fastening for cover plate for oil thermostat on crankcase top section	M6		Nm	8.5
BA03.20-P-1006-01J	Oil line (oil cooler) with bracket	M8		Nm	20
BA03.20-P-1007-01J	Knock sensor shield	M8		Nm	20
BA03.20-P-1008-01J	Bolt for oil dipstick guide tube on camshaft adjuster cover	M6		Nm	8.5
BA03.20-P-1009-01J	Drain plug for coolant			Nm	15