LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> GL320 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Crank Assembly - 164 Chassis) >> Testing & Repair >> Connecting rod bearing/bolts/screws - AR03.10-P-6111 >> Inspect connecting rod bolts - AR03.10-P-6111-01VA

Inspect connecting rod bolts - AR03.10-P-6111-01VA

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
TEST DATA FOR CONNECTING ROD BOLTS

Number Designation Engine 272 Engine 273
BE03.10-P-1001-03A connecting rod bolts Thread dia. ø M 8 x 1 8 x 1
Shank length when new mm 39.5 39.5
  max. mm 40.5 40.5
  Part no.   - -
  1. Measure length (L).

    IMPORTANT If the length (L) of the connecting rod bolts exceeds the maximum permissible dimension the connecting rod bolts must be replaced.

    Fig 1: Identifying Shank Length (L)
    G04731508Courtesy of MERCEDES-BENZ OF NORTH AMERICA.