Mobile phone system, function - GF82.70-P-0007GA
MODEL 463.306 /336 /346 up to 31.5.12 except CODE (ZJ1) Japan version as of Model Year 2011 /YoM 10
MODEL 463.202 /222 /236 /237 /270 /271 /303 /340 /341 up to 31.5.12 except CODE (ZJ1) Japan version as of Model Year 2009 /YoM 08
Depending on the equipment installed one of the following control units will be installed, hereafter referred to as the "audio unit":
- Radio (A2) (with code (EF5) MB Audio 20 CD radio, (NTG 2.5))
- COMAND operating, display and controller unit (A40/3) (with code (EU1) COMAND, APS)
Function requirements, general
- Status of circuit 30 "ON" or circuit 15R "ON".
- One mobile phone network is available in sufficient strength and quality
- Mobile phone system operating error-free
- Enabled Subscriber Identification Module (SIM) card inserted in mobile phone
- Compatible mobile phone inserted into UPCI [UHI] cell phone holder (Universal Portable Cell Phone Interface) (A34/15), which is connected to the Bluetooth module (A34/7) (with code (EH2) Comfort telephony), or Bluetooth-capable mobile phone authorized in vehicle and on the audio equipment (without code (EH2) Comfort telephony)
Mobile telephone system, general
The mobile telephone system is available in the following two variants:
- Basic telephony (without code (EH2) Comfort telephony)
- Comfort telephony (with code (EH2) Comfort telephony)
Both versions use Bluetooth technology for data transfer.
So that a bluetooth-capable mobile phone that is authorized on the audio equipment can be operated in the vehicle, the mobile phone must support the hands-free profile (HFP) 1.0 or 1.5. More information under:
- www.mercedes-benz-mobile.com
The mobile phone system consists of the following component functions:
- Telephone book (with code (EF5) MB Audio 20 CD radio, (NTG 2.5))
- Address book (with code (EU1) COMAND, APS)
Further subfunctions are described in separate documents:
- Telephone switch-on/switch-off characteristics, function
- Placing/ending phone call, function
- Accept call and reject call with the mobile phone system, function
- Short message service (SMS) function (with code (EH2) Comfort telephony)
- Mercedes-Benz Contact function (without code (ZJ1) Japan version)
- Voice control function (with code (EU1) COMAND, APS)
The system is described using the comfort telephony as an example. Differences from the basic telephony are marked by the symbol
.
Telephone book (with code (EF5) MB Audio 20 CD radio, (NTG 2.5))
The phone book contains the phone book entries stored in the audio equipment. The user can manage (view and delete) his contact data in the telephone book. Additionally, the data from the phone book of the mobile phone can be loaded into the phone book of the audio unit (external data).
The data from the mobile phone's telephone book are then permanently available, even if the mobile phone is no longer inserted in UPCI [UHI] cell phone holder.
External phone book entries can only be removed by deleting all entries or deleting individual entries.
The system can be provided with the stored information via the phone book entries and the connection established immediately. The telephone book is activated via the "Telephone (Tel)" base function, using the "Tel" hardkey on the audio equipment, or via the "Tel" menu item in the application bar, using the keypad on the audio equipment, and then via the "Name" menu item in the function bar.
In vehicles with basic telephony, it is possible to gain read access to the telephone book of the mobile phone, if the mobile phone supports the Bluetooth profile Phone Book Access Profile (PBAP). Otherwise, data from the phone book of the mobile phone can only be loaded onto the audio equipment via "vCards". Additionally, the user can enter or select a telephone number in the following ways:
- Telephone buttons on audio equipment
- Telephone number previously selected from the call lists
- Telephone number that has already been transmitted to the audio equipment phone book
Address book (with code (EU1) COMAND, APS)
The address book contains the address entries saved in the audio equipment. The user can manage all the contact data in the address book (view, edit, add, delete and create). Additionally, the data from the phone book of the mobile phone can be uploaded into the address book of the audio unit.
The data from the mobile phone's telephone book are then permanently available, even if the mobile phone is no longer inserted in UPCI [UHI] cell phone holder.
Address entries can only be removed by deleting individual entries or by deleting the entire address book.
The Bluetooth interface of the mobile phone and the Bluetooth antenna (A2/91) can be used to transfer data from other external devices (e.g. PDA, laptop, etc.) to the address book. These data are then permanently available as address entries. The address-relevant applications for telephony can be started directly via the address book entries and provided with the data stored.
The address book is activated via the "Telephone (Tel)" base function, using the "Tel" hardkey on the audio equipment, or via the "Tel" menu item in the application bar, using the keypad on the audio equipment, and then via the "Address book" menu item in the function bar.
In vehicles with basic telephony, it is possible to gain read access to the telephone book of the mobile phone if the mobile phone supports the "PBAP" Bluetooth profile. Otherwise, data from the phone book of the mobile phone can only be loaded onto the audio equipment via "vCards". Additionally, the user can enter or select a telephone number in the following ways:
- Telephone buttons on audio equipment
- Telephone number previously selected from the call lists
- Previously edited telephone number from the audio equipment's address book
Address entries can contain the following:
- Names (surname and first name)
- Postal addresses (private or business)
- Telephone numbers (private, business, fixed-line network, mobile or car)
- Geo position (private or business)
- Company name
50 entries can be provided with voice commands (voice tags) for the voice control system (VCS [SBS]) (with code (EU1) COMAND, APS). The address entries stored in the "audio unit" and the data loaded from the mobile phone's phone book are displayed in the address book.
| Mobile phone system, location of components | GF82.70-P-0007-01GB | ||
| Mobile phone system, block diagram | GF82.70-P-0007-02GA | ||
| Mobile phone system, operating instructions | GF82.70-P-0007-07GA | ||
| Mobile phone system, registering | GF82.70-P-0007-03GA | ||
| Mobile phone system, establishing connection in the public telephone network | GF82.70-P-0007-04GA | ||
| Mobile phone system, establishing connection to mobile phone subscribers | GF82.70-P-0007-05GA | ||
| General information on mobile phone system | Mobile telephone network | GF82.70-P-0007-06GA | |
| Bluetooth | GF82.70-P-0007-06GB | ||
| Telephone switch-on/switch-off characteristics, function | GF82.70-P-2007GA | ||
| Setting up/ending phone call, function | GF82.70-P-2008GA | ||
| Accept call and reject call with the mobile phone system, function | GF82.70-P-2018G | ||
| Short Message Service (SMS), function | With code (EH2) Comfort telephony | GF82.70-P-2014GA | |
| Mercedes-Benz Contact, function | Without code (ZJ1) Japan version | GF82.70-P-2019G | |
| Voice control, function | With code (EU1) COMAND, APS | GF82.70-P-3020GA |