Hydraulic control unit, location/task/function - GF26.60-P-4001A
TRANSMISSION 716.6 in MODEL 203, 230 with CODE (424) Sequentronic automated manual transmission (SEQ) up to Model Year 8
TRANSMISSION 716.6 in MODEL 208, 209, 211 with CODE (424) Sequentronic automated manual transmission (SEQ)
| Hydraulic control unit, location | The hydraulic control unit (1) is located towards the rear of the manual transmission (2). | |
| Hydraulic control unit, task | Acts as an actuator to operate the clutch and the gearshift. | |
| Hydraulic control unit, function | GF26.60-P-4001-03A |