Removing tapered roller bearing outer races from rear axle housing - AR35.31-P-0550-09T

Fig 1: Identifying Removal And Installation Tool (140 589 10 43 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Mount removal and installation tool (038) on rear axle housing.
2. Using thrust piece (038a) 140 589 10 43 00 part 16, pull large tapered roller bearing outer race (46b) out of the rear axle housing.
   Fig 2: Pulling Large Tapered Roller Bearing Outer Race Out Of Rear Axle Housing

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
3. Using thrust piece (038b) 140 589 10 43 00 part 18, press small tapered roller bearing-outer race (43e) out of the rear axle housing.
4. Detach removal and installation tool (038).

Fig 3: Pressing Small Tapered Roller Bearing-Outer Race Out Of Rear Axle Housing

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.