Rear axle differential ring and pinion - BA35.31-P-1000-01A
Model 129, 140, 170, 199, 202, 203, 208, 209, 210, 211, 215, 219, 220, 230
MODIFICATION NOTES
| 7.3.06 | Collar nut, joint flange to drive pinion | Model 211 with rear axle differential dia. 187/215 mm |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 129.060 | Model 129.059/064, 129.058/063 as of 01.06.94 | Model 129.061/066, 129.058/063 up to 31.05.94 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | > 180 | > 180 | > 180 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 129.067, 129.076 up to 31.01.98 | Model 129.068, 129.076 as of 01.02.98 | Model 140.02/03/04/06/1 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | 125 | > 180 | > 180 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 140.05/07 | Model 170.435 | Model 170.444/445/447/449 | Model 170.465/466 | |
|---|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | 125 | >90 | > 180 | > 180 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 199 with rear axle differential dia. 210 mm | Model 199 with rear axle differential dia. 215 mm | Model 202.018/078/120/121/122/125/180/182 except code 450 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | >115 | >150 | >90 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 202.018/078/120/121/122/125/182 with code 450 | Model 202.020/022/023/024/025/026/028/029/033/080/081/082/083/086/087/088/089/093/128/133/188/193, 202.085 with automatic 5- speed transmission, 202.134/194 except code 450 | Model 202.033/093/133/193, 202.085 with manual 5-speed transmission, 202.134/194 with code 450 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | > 180 | > 180 | > 180 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 203.006/007/016/064/206/207/216/264/706/707, Model 203.004/204 with code 450 up to 08/2002 | Model 203.008/020/040/042/043/046/052/054/056/081/084/087/092/208/220/240/242/243/246/252/254/256/281/284/287/292/708/730/731/742/743/740/746/756, Model 203.004/061/204/261 as of 09/2002 | Model 203.018/065/218/265/718 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | > 180 | 150 | >115 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 203.035/045/235/245/735/745/747, 203.061/261 up to 08/2002, 203.004/204 except Code 450 manufactured prior to 08/2002 | Model 203.076/276 | Model 208.335/344/345/347/348/435/444/445/447/448 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | > 180 | 160 | > 180 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 208.365/370/465/470 | Model 208.374 | Model 209.308/320/341/342/343/354/356/361/420/441/442/454/456/461 | Model 209.365/375 | |
|---|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | > 180 | > 180 | 150 | > 180 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 209.316/372/376/377/465/472/475/476/477 215 mm dia. rear axle differential | Model 209.316/376/465/475/476 rear axle differential dia. 210 mm | Model 210.003/004 except code 450 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | 160 | 125 | >90 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 210.006/015/017/025/045/053/055/063/065/08/206/215/217/225/245/263/265/281/282/283/606/663, 210.007 with code 450 | Model 210.010/020/035/037/048/061/062/210/235/237/248/261/262/610, 210.003/004 with code 450, 210.007 except code 450 | Model 210.070/074/270/274 up to 31.01.98, 210.072/272/617 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | > 180 | > 180 | 150 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 210.070/074/270/274 as of 01.02.98, 210.016/026/216/226/616 | Model 211 with rear axle differential dia. 187/200/215 mm | Model 211 with rear axle differential dia. 210 mm | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | > 180 | >160 | >115 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 211 with rear axle differential dia. 240 mm | Model 211.042/061/242/261, 211.004 except Code 450 | Model 215.375/378 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | >115 | 150 | > 180 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 219 with rear axle differential dia. 200 mm dia. 215 mm | Model 220.025/026/028/070/075/126/128/170/175/178 | Model 220.063/065/067/083/084/087/165/167/183/184/187 | |
|---|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | 150 | > 180 | > 180 |
REAR AXLE DIFFERENTIAL GEAR SET
| Number | Designation | Model 230 except model 230.467, except model 230.474/475 with rear axle transmission 210E | Model 230.467, Model 230.474/475 with rear axle transmission 210E | |
|---|---|---|---|---|
| BA35.31-P-1001-01A | Collar nut, joint flange to drive pinion | Nm | 160 | - |