Rear axle differential housing - BA35.31-P-1000-02A
Model 124, 129, 140, 163, 170, 199, 201, 202, 208, 210, 211, 215, 219, 220, 230, 240
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Model 124 | Model 129 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | 50 | 50 | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | 150 | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 30 | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | 20 | 20 | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | - | ||
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Model 140 | Model 163 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | 50 | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | - | ||
| Stage 2 | ∠° | 45 | - | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | - | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | 20 | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | - | ||
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Model 170 | Type 199 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | 40 | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | - | ||
| Stage 2 | ∠° | 45 | - | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | - | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | - | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 25 | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | 17 | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | - | ||
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Type 201 | Model 202 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | 50 | 50 | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | 150 | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 25 | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | - | ||
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Model 208 | Model 210 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | 50 | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | 150 | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 30 | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | - | 20 | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | - | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | - | ||
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Model 211 | |||
|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | ||
| Stage 2 | ∠° | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | - | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | 35 | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | 25 | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | 30 | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | |
| Stage 2 | ∠° | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | ||
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Model 215 | |||
|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | ||
| Stage 2 | ∠° | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | |
| Stage 2 | ∠° | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | ||
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Model 220 | |||
|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | ||
| Stage 2 | ∠° | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | |
| Stage 2 | ∠° | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | ||
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Model 230 except code P99 | Model 230 with code P99 | |||
|---|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
| Stage 2 | ∠° | 45 | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | - | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | - | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | 30 | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | 37 | - | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | - | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | - | |
| Stage 2 | ∠° | - | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | 50 | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | 40 | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | 35 | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | 35 | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | 25 | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | 25 | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | 20 | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | 30 | ||
REAR AXLE CENTER ASSEMBLY HOUSING
| Number | Designation | Model 240 | |||
|---|---|---|---|---|---|
| BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | - | |
| Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | ||
| Stage 2 | ∠° | 45 | |||
| BA35.31-P-1002-02A | Oil filler screw, rear axle differential | Nm | 50 | ||
| BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | ||
| BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | - | ||
| BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | ||
| BA35.31-P-1006-02A | Bolt of side bearing cap to rear axle center assembly | Nm | - | ||
| BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | - | ||
| BA35.31-P-1008-02A | Rear axle center assembly breather to end cover | Nm | - | ||
| BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | - | ||
| BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | - | |
| Stage 2 | ∠° | - | |||
| BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | - | ||
| BA35.31-P-1012-02A | Threaded insert to differential housing | Nm | - | ||
| BA35.31-P-1013-02A | Fitting to threaded insert | Nm | - | ||
| BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | - | ||
| BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | - | ||
| BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | - | |||
| BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | - | ||
| BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | - | ||
| BA35.31-P-1019-02A | Temperature switch to end cover for differential | Nm | - | ||