Pulling tapered roller bearing inner race off drive pinion - AR35.31-P-0550-10T

Fig 1: Identifying Puller (001 589 50 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Extension (000 589 63 34 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Collet Chuck (000 589 02 34 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying Open-End Wrench (140 589 00 01 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Put together puller (024) with extension (024c) and clamping pliers (024a) and tighten.
Use open wrench if necessary for assembling or dismantling the extension (024c) .

Fig 5: Identifying Puller, Extension And Clamping Pliers
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Push puller (024) with clamping pliers (024a) over the tapered roller bearing inner race and clamp securely behind the rollers (arrow) using a roll pin (024b).
Using puller (024), detach tapered roller bearing inner race from drive pinion (47) and remove

Fig 6: Locating Tapered Roller Bearing Inner Race And Rollers

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.