Installing differential side gears and differential bevel gears - AR35.31-P-0560-04T

Fig 1: Identifying Assembly Arbor (116 589 18 61 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Assembly Arbor (126 589 02 15 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Insert assembly arbors (046) 116 589 18 61 00 into drill holes of differential case.
2. Mount both rear axle side gears (17) with thrust plates (18) on the assembly arbor (046) in the differential case.
   Fig 3: Inserting Assembly Arbors Into Drill Holes Of Differential Case

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
3. Position both differential bevel gears (15) and spherical washers (14) together and exactly opposite in the differential case and screw in using assembly arbors (046).
   Fig 4: Screwing In Differential Bevel Gears And Spherical Washers

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
4. Instead of differential pinion shaft, push assembly arbor (021) 126 589 02 15 00 into differential case to secure differential pinions and spherical washers.

Fig 5: Pushing Assembly Arbor Into Differential Case

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.