Driving out and driving in differential pin and roll pin - AR35.31-P-0560-02T

Fig 1: Identifying Assembly Arbor (126 589 02 15 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Removal: 

1. Using a suitable drift, hammer roll pin (19) for the differential pinion shaft (16) out of the differential case (13).
2. Use assembly arbor to knock differential pinion shaft (16) out of differential case (13).

   Installation 

3. Use assembly arbor to knock differential pinion shaft (16) into differential case (13).

   In the process pay attention to the bore for the roll pin (19).

4. Knock in new roll pin (19) until it is seated centrally in differential pinion shaft (16).

Fig 2: Identifying Roll Pin, Differential Pinion Shaft And Differential Case

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.