Remove/install rear window wiper motor - AR82.30-P-6900T
MODEL 211.2
MODIFICATION NOTES
| 5.7.06 | "Disconnect/connect battery ground line" removed |
| Remove/install | |||
| 1 | Remove door lining assembly on rear-end door | AR72.20-P-3520T | |
| 2 | Remove wiper arm of rear-end door | AR82.30-P-6910T | |
| 3 | Detach electrical connector (1) on rear-end door wiper motor (M6/4) | ||
| 4 | Undo screws (2) and remove the rear-end door wiper motor (M6/4) from the rear-end door | *BA82.30-P-1008-01A | |
| 5 | Install in the reverse order |
WINDSHIELD WIPER
| Number | Designation | Model 211.2 | |
|---|---|---|---|
| BA82.30-P-1008-01A | Bolt, wiper motor to rear door | Nm | 7 |