Remove/install license plate lamps - AR82.10-P-5161TX

MODEL 219.3 

Fig 1: Identifying License Plate Lamps Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Remove cover (1)	See: ↓
		Remove/install trunk lid paneling	AR68.30-P-8150TX
2	Remove expansion clips (2)	Replace damaged spreading clips (2).
3	Remove outer paneling (7) from trunk lid (5)		AR88.50-P-5080TX
4	Fold down trunk lid paneling (3) until the left license plate lamp (E19/1) or the right license plate lamp (E19/2) is accessible from the rear
5	Unclip catch hook (4) of left license plate lamp (E19/1) or right license plate lamp (E19/2) and pull out of trunk lid (5) until the electrical connector (6) is accessible
6	Separate electrical connector (6) and remove the left license plate lamp (E19/1) or right license plate lamp (E19/2)
7	Install in the reverse order