LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> CL65 >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Steering -- E550 (211.090)) >> Testing & Repair >> Remove/install inner tie rod with axial joint - AR46.40-P-0201PW

Remove/install inner tie rod with axial joint - AR46.40-P-0201PW

WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 203.08/09/28/29, 211.08/09/28/29, 220.08/18 

Shown on model 203 

Fig 1: Removing/Installing Inner Tie Rod With Axial Joint
G07279201Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
REMOVINGINSTALLING Remove/install     
1 Remove bellows   AR46.40-P-0400PW 
2 Counterhold rack using open wrench (013)    
3 Remove inner track rod with axial joint (12) IMPORTANT Do not use force (hammer impact, strong lever action).
TORQUE SPECIFICATION
*BA46.40-P-1003-01E 
    SPECIAL TOOL *201589000100
4 Install in the reverse order    
TIE ROD

Number Designation   Models 203.081/084/087/092/281/284/287/292 Model 220.083/084/087/183/184/187 Model 211.08/09/28/29
BA46.40-P-1003-01E Inner track rod with axial joint to rack-and-pinion joint Nm 110 110 110
Fig 2: Identifying Open End Wrench (201 589 00 01 00)
G07279202Courtesy of MERCEDES-BENZ OF NORTH AMERICA.