Preservation - AP97.20-P-0640SX

MODEL 216

MODEL 221

	Application
	Underfloor preservation		AH97.20-P-2000-01A
	Instructions for processing permanent underbody protection		AH97.20-P-9409-01A
1	Apply seam seal
	Seam sealing following repair		AR97.10-P-4000SX
	Notes on sprayable seam sealing		AH97.10-P-0002-01A
2	Apply hollow cavity preservation	Before use, shake or stir preservation wax thoroughly.
	Cavity preservation following repair work	Model 221	AR97.20-P-1500SX
		Model 216	AR97.20-P-1500SC
	Notes on cavity preservation		AH97.20-P-0001-01B
	Processing instructions for cavity preservation agent		AP97.20-P-0640-01SX
3	Apply underbody preservation agent	For represervation work on the underbody, brake parts such as brake disks and brake hoses should be suitably covered in order to prevent them from being sprayed or subsequent time-consuming cleaning.
	Processing permanent underfloor protection agent for painting		AR97.20-P-0500-03SX
		Underfloor protection	*BR00.45-Z-1001-05A
4	Remove wax fog residues on outer surface with silicon remover
5	Treat outer surface with polish and gloss preservation agent	Polish	*BR00.45-Z-1013-04A
5		Gloss preserver	*BR00.45-Z-1014-04A
6	Install transport protection foil	As replacement for exterior preservation.
	Installing transport foil		AR97.20-P-4000SX
	Notes on transportation sheeting		AH97.20-P-9409-03A

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1013-04A	Polish, silicone free 5 l, DB supply specification 7545.00	A 000 986 45 74
BR00.45-Z-1014-04A	Gloss preservation, 500 ml, DB supply specification 7551.10	A 000 986 44 74
BR00.45-Z-1001-05A	Underfloor protection 800 ml	A 001 986 46 10