Installing transport foil - AR97.20-P-4000SX

MODEL 216, 221 

	Notes on transportation sheeting		AH97.20-P-9409-03A
1	Heat old foils and remove.	Heat foils only to the extent that they can still be touched; otherwise, the paint could be damaged.
2	Clean the vehicle	Chamois the vehicle dry.
3	Check paint surfaces of vehicle	When replacing foil, the edges of the adhesive tape may remain visible. These edges are removed when preparing the paint. Minor swelling is of no significance when replacing. The new foil can be applied to this painted surface.
4	Install new transport foil by hand	Do not glue foil on plastic parts and rubber seals (risk of adhesive residues).