Remove/install pedal assembly (with transmission 722.9) - AR29.10-P-0300VA

MODELS 171.4 with TRANSMISSION 722.9 

Fig 1: Identifying Pedal Assembly Pedal Assembly Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Remove left cover below instrument panel		AR68.10-P-1500V
2	Remove front cover (1) of pedal assembly (2)		AR29.10-P-0320V
3	Detach safety clamp (3a) and pull out bolt (3b)	Check bolt (3b) for damage and wear, replace if necessary.
		Installation:  Grease bolt (3b) lightly. Long-life grease	*BR00.45-Z-1001-06A
4	Unscrew nuts (2a)	Nut, pedal assembly to body	*BA29.10-P-1001-02D
5	Take out pedal assembly (2)
6.1	Remove rear cover (4) from pedal assembly (2)	When replacing the pedal assembly (2) or when removing the brake pedal (5)	AR29.10-P-0320V
7	Install in the reverse order

PEDALS, BEARING BRACKET

Number	Designation		Model 171
BA29.10-P-1001-02D	Nut, brake pedal assembly to body	Nm	20

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51