Remove/install windshield - AR67.10-P-1000P
MODEL 171
| Danger | Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | Always remove ignition key when working on windshield wiper mechanism. | - |
| Notes on removing and installing windshield | AH67.10-P-1000-01P | ||
| Removing | |||
| 1 | Prepare glue cartridge | ||
| Repair kit | 000589866300 | ||
| 2 | Open driver-side window | The side window of the driver door should remain open during the curing time. Otherwise the windshield (1) can be pressed toward outside by the air when the doors are closed. | |
| 3 | Remove detachable parts in area windshield | AR67.10-P-1050V | |
| 4 | Cover dashboard | ||
| 5 | Cut out windshield with window removal tool. | ||
| Install | |||
| 6 | Remove silicon gel of light sensor or rain/light sensor from windshield (1) | ||
| 7 | Prepare body flange for installation of window | AR67.10-P-1501-01P | |
| 8 | Transfer detachable parts on windshield (1) | ||
| 9 | Prepare windshield for installation | Repair kit, glazing, installing window, 2-component adhesive & 1-component adhesive | AR67.10-P-1000-03P |
| 10.1 | Replace rubber window spacers | Model 171 | AR67.10-P-1000-02V |
| 10.2 | Replace rubber spacers | Model 240 | - |
| 11 | Align windshield (1) in body opening | AR67.10-P-1000-04G | |
| 12 | Remove protective foil from rubber window spacers | ||
| 13 | Apply adhesive material | AR67.10-P-1000-08P | |
| 14 | Install windshield | AR67.10-P-1503-01P | |
| 15 | Remove detachable parts in area of windshield | Model 171 | AR67.10-P-1050V |
| 16 | Remove cover from dashboard | ||
| 17 | Check all electrical consumers in area repaired for proper function | ||
| 18 | Close side window in driver's door | ||
| 19 | Clean windshield (1) and vehicle interior |