Remove/install battery - AR54.10-P-0005RBS (Black Series)

MODEL 230.4 with CODE (P99) "AMG Black Series" special model 

Fig 1: Removing/Installing Battery - Black Series

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of explosion  caused by oxyhydrogen gas. Risk of poisoning and caustic burns  caused by swallowing battery acid. Risk of injury  caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
	Notes on battery		AH54.10-P-0001-01A
	Notes on AGM battery		AH54.10-P-0002-01A
1	Disconnect ground line for on-board electrical system battery (G1)		AR54.10-P-0003RBS
2	Lift off cover (1) of positive terminal
3	Undo nut (2) and connect positive line to battery	Installation:  Ensure that the positive line is seated firmly, otherwise the positive terminal may be damaged.
			*BA54.10-P-1012-01C
4	Pull off vent hose (3)
5	Undo bolts (4) and remove bracket (5)
6	Remove bolt (6) and remove bracket (7)
7	Remove on-board electrical system battery (G1)
8	Install in the reverse order