Seam sealing following repair - AR97.10-P-4000RT
MODEL 251
| Figure item, etc. | Work instructions | ||
| Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when handling anticorrosion agents. | Never spray anticorrosion agents on flames or glowing hot objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection. | AS97.00-Z-0001-01A | |
| Underfloor preservation | AH97.20-P-2000-01A | ||
| Cavity preservation following repair work | AR97.20-P-1500RT | ||
| Processing of body sealant (paintable) before painting | AR97.10-P-0500-02A | ||
| Seam sealing following repair, front end damage | AR97.10-P-4000-01RT | ||
| Seam sealing following repair, rear end damage | AR97.10-P-4000-02RT | ||
| Seam sealing following repair, side damage | AR97.10-P-4000-03RT | ||
| Seam sealing following repair, detachable body components | AR97.10-P-4000-04RT | ||
| Sealing seam after repairing roof | AR97.10-P-4000-05RT |