Remove/install additional battery - AR54.10-P-0007RT

MODEL 251 

Fig 1: Identifying Battery Remove/Install Components - Shown On Model 251.1

Courtesy of MERCEDES-BENZ USA

Shown on model 251.1 

	Remove/install
1	Remove front floor covering	Right side of vehicle	AR68.20-P-2070RT
2	Remove impact absorber (1)
3	Unscrew nuts (3, 5) and remove clips (4)	Do not mix up nuts (3) and nuts (5). Pay attention to correct seat of clips (4).
4	Remove intermediate bottom (2)
5	Detach plug on negative terminal (7) of additional battery (G1/7)
6	Detach plug on positive terminal (6) of additional battery (G1/7)
7	Remove bolt (8), open retaining clamp (9)	Ensure that the anchorage fitting (10) engages into the retaining panel.
			*BA54.10-P-1014-01C
8	Remove additional battery (G1/7)
9	Install in the reverse order

BATTERY

Number	Designation			Model 251
BA54.10-P-1014-01C	Nut, bracket for additional battery	M6	Nm	5