ME-SFI idle, function - GF07.61-P-2006MIS
ENGINE 272.9 (except 272.974) in MODEL 221.0 /1 (except 221.095 /195) as of model year 2009/AEJ 08
ENGINE 273.9 in MODEL 216.3, 221.0 /1 as of model year 2009/ AEJ 08
Function requirements for idling, general points
- Circuit 87M ON (engine control ON)
- Engine running (engine speed >700 RPM)
- Accelerator not operated
Idling, general points
The following partial functions are active in neutral and are described in the following documents:
- ME fuel supply, function
- ME-SFI [ME] injection regulation, function
- Motor electronics (ME) ignition system, function
- ME-SFI start, post-start phase and warm-up enrichment, function
- ME-SFI idle speed control function
- ME-SFI alternator interface function
- ME engine speed signal, function
- ME-SFI safety fuel shutoff, function
- ME-SFI lambda control, function
- ME-SFI two-sensor control, function
- ME-SFI oxygen sensor heater function
- Self-adjustment of mixture formation, function
- Smooth engine running analysis, function
- ME-SFI thermal management, function
- ME engine torque requests function
- Camshaft adjustment, function
- ME-SFI knock control function
- Overheating/pinging protection, function
- Air injection, function
- ME-SFI electronic accelerator, function
- Electronic accelerator pedal emergency running mode, function
- Purging function
- System purging with leak test function (with code (494) USA version)
- Monitoring catalytic converter efficiency, function
| ME fuel supply, function | GF07.61-P-3004MIS | |
| ME-SFI [ME] injection regulation, function | GF07.61-P-3002MIS | |
| Motor electronics (ME) ignition system, function | GF07.61-P-3008MIS | |
| ME-SFI start, post-start phase and warm-up enrichment, function | GF07.61-P-3014MIS | |
| ME-SFI idle speed control function | GF07.61-P-2008MIS | |
| ME-SFI alternator interface function | GF07.61-P-3003MIS | |
| ME engine speed signal, function | GF07.61-P-3017MIS | |
| ME-SFI safety fuel shutoff, function | GF07.61-P-3018MIS | |
| ME-SFI lambda control, function | GF07.61-P-4022MIS | |
| ME-SFI two-sensor control, function | GF07.61-P-3020MIS | |
| ME-SFI oxygen sensor heater function | GF07.61-P-3024MIS | |
| Self-adjustment of mixture formation, function | GF07.10-P-1029MIS | |
| Smooth engine running analysis, function | GF07.10-P-1030MIS | |
| ME-SFI thermal management, function | GF07.61-P-4012MIS | |
| ME engine torque requests function | GF07.61-P-4013MIS | |
| Camshaft adjustment, function | GF07.61-P-4021MIS | |
| ME-SFI knock control function | GF07.61-P-4031MIS | |
| Overheating/pinging protection, function | GF07.61-P-4027MIS | |
| Air injection, function | GF14.30-P-3012MIS | |
| ME-SFI electronic accelerator, function | GF30.20-P-3012MIS | |
| Electronic accelerator pedal emergency running mode, function | GF30.20-P-4026MIS | |
| Purging function | GF47.30-P-3015MIS | |
| Purging system with leak test function | With code (494) USA version | GF47.30-P-3016MIS |
| Monitoring catalytic converter efficiency, function | GF49.10-P-3033MIS |