Table of contents for function description of motor electronics (ME-SFI) fuel injection and ignition system - GF07.61-P-0999G
ENGINE 273 in MODEL 463.202/222/236/237 up to 31.5.12 as of model year 2009/YoM 08
| Motor electronics (ME-SFI) fuel injection and ignition system, function | GF07.61-P-0001G | ||
| Motor electronics (ME-SFI) gasoline injection and ignition system, block diagram | GF07.61-P-0001-13G | ||
| (ME-SFI) motor electronics gasoline injection and ignition system, location of components on engine | GF07.61-P-0001-14G | ||
| (ME-SFI) motor electronics fuel injection and ignition system, location of components on vehicle | GF07.61-P-0001-15G | ||
| ME-SFI ignition ON, function | GF07.61-P-3005G | ||
| ME-SFI starting, function | GF07.61-P-2003G | ||
| ME-SFI idle, function | GF07.61-P-2006G | ||
| ME-SFI driving mode, function | GF07.61-P-2005G | ||
| ME-SFI ignition OFF, function | GF07.61-P-3006G | ||
| ME-SFI fuel supply, function | GF07.61-P-3004G | ||
| ME-SFI [ME] injection regulation, function | GF07.61-P-3002G | ||
| Motor electronics (ME) ignition system, function | GF07.61-P-3008G | ||
| ME-SFI synchronization of fuel injection and firing order, function | GF07.61-P-4009G | ||
| ME-SFI [ME] Start, post-start phase and warm-up enrichment, function | GF07.61-P-3014G | ||
| ME-SFI idle speed control function | GF07.61-P-2008G | ||
| ME-SFI alternator interface function | GF07.61-P-3003G | ||
| ME engine speed signal, function | GF07.61-P-3017G | ||
| ME-SFI maximum engine speed limitation, function | GF07.61-P-3007G | ||
| ME-SFI limiting maximum vehicle speed, function | GF07.61-P-3019G | ||
| ME-SFI safety fuel shutoff, function | GF07.61-P-3018G | ||
| Intake manifold switchover function | GF07.61-P-3028G | ||
| ME tumble flap switchover function | GF07.61-P-4017G | ||
| ME-SFI lambda control, function | GF07.61-P-4022G | ||
| ME-SFI two-sensor control, function | GF07.61-P-3020G | ||
| ME-SFI oxygen sensor heater function | GF07.61-P-3024G | ||
| Self-adjustment of mixture formation, function | GF07.10-P-1029G | ||
| Correction programming, function | GF07.61-P-3031G | ||
| Smooth engine running analysis, function | GF07.10-P-1030G | ||
| ME-SFI thermal management, function | GF07.61-P-4012G | ||
| ME-SFI engine torque requests function | GF07.61-P-4013G | ||
| ME-SFI overrun fuel shutoff, function | GF07.61-P-4019G | ||
| Camshaft adjustment, function | GF07.61-P-4021G | ||
| ME-SFI transmission shift delay, function | GF07.61-P-4023G | ||
| ME-SFI knock control function | GF07.61-P-4031G | ||
| Overheating/pinging protection, function | GF07.61-P-4027G | ||
| Air injection, function | GF14.30-P-3012G | ||
| Starter control, function | GF15.30-P-3000GK | ||
| ME-SFI electronic accelerator, function | GF30.20-P-3012G | ||
| Electronic accelerator pedal emergency running mode, function | GF30.20-P-4026G | ||
| On-board refueling vapor recovery function | For code (ZU8) USA version | GF47.10-P-3004G | |
| Purging function | GF47.30-P-3015G | ||
| Purging system with leak test function | For code (ZU8) USA version | GF47.30-P-3016G | |
| Monitoring catalytic converter efficiency, function | GF49.10-P-3033G | ||
| Overview of system components for motor electronics (ME-SFI) fuel injection and ignition system | GF07.61-P-9997G |