Emission control, function - GF14.00-P-3000AM
ENGINE 113.990 in MODEL 211, 219
ENGINE 113.991 in MODEL 215, 220
ENGINE 113.992 in MODEL 230 up to Model Year 2008/AEJ 07
ENGINE 113.993 in MODEL 463 up to 31.5.12
ENGINE 113.995 in MODEL 230 up to Model Year 2008/AEJ 07
The emission control system is divided into the following subsystems which are controlled and coordinated by the ME control unit:
- Lambda control
- Two-sensor control
- O2 sensor heater
- TWC heating up
- Secondary air injection
The task of the emission control system is to reduce the exhaust emissions of:
- nitrogen oxides (NOX)
- hydrocarbon (HC)
- carbon monoxide (CO)
| ME-SFI two-sensor control, function | GF07.61-P-3020AM | ||
| O2 sensor heater, function | GF07.61-P-3025AM | ||
| Self-adjustment of mixture formation, function | GF07.10-P-1029AM | ||
| ME-SFI TWC heating-up, function | GF07.61-P-3032AM | ||
| ME-SFI lambda control, function | GF07.61-P-4022AM | ||
| ME-SFI transmission shift delay, function | GF07.61-P-4023AM | ||
| Air injection, function | GF14.30-P-3012AM | ||
| Catalytic converter efficiency monitoring function | GF49.10-P-3033AM |