Replace brake hoses - AR42.10-P-0013P

MODEL 203, 209 

Brake hose routing at the front axle 

Fig 1: Identifying Brake Hose Routing At Front Axle

Courtesy of MERCEDES-BENZ USA

Brake hose routing at the rear axle 

Fig 2: Identifying Brake Hose Routing At Rear Axle

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of poisoning  caused by swallowing brake fluid. Risk of injury  caused by brake fluid coming into contact with skin and eyes.	Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Brake fluid notes		AH42.50-P-0001-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
	Notes on installing brake hoses		AH42.10-P-9406-01A
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Remove wheels	Vehicles with code P98 Black Series	AP40.10-P-4050Z
2	Detach brake line (5) from brake hose (51)	Seal off line connections immediately with plugs. The brake fluid reservoir must not drain completely.
			Fig 3
			*BA42.10-P-1001-04A
3	Unclip brake hose clip (51a) at Unclip suspension strut	Remove tie straps
4	Remove brake hose (51) from floating caliper.		Fig 4
			Fig 3
			*BA42.10-P-1002-04A
5	Install in the reverse order
6	Bleed brake system		AR42.10-P-0010P

Fig 3: Identifying Box Wrench Bit (000 589 75 03 00)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Ring Wrench (000 589 76 03 00)

Courtesy of MERCEDES-BENZ USA