Removing and installing brake pedal - AR29.10-P-4597R

MODEL 230 

Fig 1: Identifying Brake Pedal Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Remove left cover below instrument panel		AR68.10-P-1500R
2	Remove stop light switch (S9/1)		AR42.10-P-0040I
3	Release cover (1) from spring clips and take down and off	Installation:  Insert pins (arrows) in the recesses in the pedal bracket (2).
4	Unscrew pins (3)	Installation:  apply light coating of grease to pin. Inspect pins, replace if necessary.	*BR00.45-Z-1001-06A
5	Unbolt brake pedal bearing bracket (2) and take out		*BA29.10-P-1001-02D
6	Install in the reverse order

PEDALS, BEARING BRACKET

Number	Designation		Model 230
BA29.10-P-1001-02D	Nut, brake pedal assembly to body	Nm	20

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51