Remove/install mechanical stop lamp switch - AR42.10-P-0040I

MODEL 211, 215, 220, 230 

Model 211, 230 

Fig 1: Identifying Mechanical Stop Lamp Switch Components (Model 211, 230)

Courtesy of MERCEDES-BENZ USA

Model 215, 220 

Fig 2: Identifying Mechanical Stop Lamp Switch Components (Model 215, 220)

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Remove left cover below instrument panel	Model 211	AR68.10-P-1500T
		Model 215	AR68.10-P-1500N
		Model 220	AR68.10-P-1500M
		Model 230	AR68.10-P-1500R
2	Unplug electric connector at stop lamp switch (S9/1)
3	Press catch (1)
4	Turn and withdraw stop lamp switch (S9/1).	Installation:  Pull out actuating pin (2) completely. Depress brake pedal (24), insert stop lamp switch (S9/1) and rotate until the catch (1) is latched. The actuating path is adjusted automatically.
5	Install in the reverse order