Keyless go, function - GF80.61-P-0005SM: Notes
MODEL 220, 215 as of 1.10.02
General
The keyless go function allows access and starting of the vehicle without actuating the transmitter key (A8/1). For access and drive authorization it is sufficient to carry the transmitter key (A8/1) with you.
The function of the standard central locking is maintained parallel to the keyless go functions Whereby the use of the transmitter key (A8/1) interrupts the function of the keyless go system
The convenience opening function is not possible via keyless go.
Unlock with keyless go
The vehicle can be unlocked by:
- Pulling any door handle (global or selective opening).
- Reaching into one of the door handles
- Actuating button on transmitter key (A8/1)
The vehicle can only be locked and not unlocked with the trunk lid keyless go push-button (S62/21).
Lock with keyless go
The vehicle can be locked by:
- Actuating the left rear door push contact (S47/1s2), left front door push contact (S47s2), right rear door push contact (S48/1s2) or right front door push contact (S48s2)
- Actuating the trunk lid keyless go button (S62/21) on trunk lid
- Actuate button on transmitter key (A8/1)
On vehicles with code (551a) anti-theft alarm (ATA) the anti-theft alarm system behaves in the same way as if the car is unlocked and locked with the transmitter key (A8/1).
Start engine and switch off with keyless go
The engine can be started or shut off by pressing the start/stop keyless go button (S2/3) on the selector lever.
| Keyless go, location of components | GF80.61-P-0005-01SM | ||
| Keyless go, block diagram | GF80.61-P-0005-02SM | ||
| Unlock, function | GF80.61-P-2009SM | ||
| Lock, function | GF80.61-P-2010SM | ||
| Engine start/stop, function | GF80.61-P-3012SM | ||
| Communication of transmitter key with vehicle, function | GF80.61-P-3013SM | ||
| Survey of system components, keyless go, location/task/design/function | GF80.61-P-9996TZ |