Remove/install left engine support - AR22.10-P-4350IW

ENGINE 112.975, 113.948 /966 in MODEL 220 

Fig 1: Identifying Left Engine Support Remove/Install Components

	Remove/Install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Remove poly-V-belt		AR13.22-P-1202BA
	Risk of death.  Death may result if vehicle slips or topples from the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
2	Raise vehicle.
3	Remove left engine mount		AR22.10-P-1100IW
4	Dismount refrigerant compressor (A9)	Three screws. Attach refrigerant compressor (A9) to bottom of engine compartment with lines connected.
5	Dismount support clamp (1) of engine support at engine support (2) and at oil pan top section		*BA22.10-P-1012-01L
6	Dismount engine support (2) at crankcase		*BA22.10-P-1005-01L
7	Install in the reverse order

ENGINE MOUNTS, ENGINE SUPPORTS

Number	Designation			Engine 112.975, 113.948/966 in Model 220
BA22.10-P-1005-01L	Bolt of engine support to crankcase	1st stage	Nm	20
		Step 2	∠ °	90
BA22.10-P-1012-01L	Support clamp at left engine support and at top section of oil pan		Nm	22