Kilometer/miles switchover, function - GF54.50-P-2002GH
MODEL 163 up to 31.8.00 with CODE (245) Trip computer
The information on the trip computer control module (TRIP, N41) can be displayed in either kilometers or miles.
The driver can switch the display of the trip computer control module (TRIP, N41) from kilometers to miles or vice versa as described below.
- Press the Mode button until only the "km" or "mi" symbol appears,
- Press the Reset button. The trip computer now switches to the other measuring system.
- Press the Mode button until the desired mode is displayed.
The setting is always changed for all functions.
| Function of trip computer (TRIP) | GF54.50-P-0001GH |