Replace coolant - AP20.00-P-2080GA
ENGINE 112.945 in MODEL 463.209/232/233/244/245/250
ENGINE 113.962 in MODEL 463.206/240/241/247/248/249/254
ENGINE 113.982 in MODEL 463.241/243/246
ENGINE 113.993 in MODEL 463.270/271
ENGINE 273.963 in MODEL 463.202/222/236/237
| Checking | |||
|---|---|---|---|
| Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. |
AS20.00-Z-0001-01A | |
| 1 | Check coolant level | ||
| Inspect cooling system for leaks | AR20.00-P-1010GZC | ||
| Notes on coolant level | AH20.00-P-1142-01V | ||
| 2 | Drain coolant | ||
| Drain/fill in coolant | Engine 273, engine 113.993 | AR20.00-P-1142GX | |
| Engine 112, engine 113 except 113.993 | AR20.00-P-1142HA | ||
| Notes on coolant | AH20.00-N-2080-01A | ||
| 3 | Pour in coolant | ||
| Drain/fill in coolant | Engine 273 engine 113.993 | AR20.00-P-1142GX | |
| Engine 112, engine 113 except 113.993 | AR20.00-P-1142HA | ||
| *BF20.00-P-1001-02K | |||
| *BF20.00-P-1001-02U |
COOLING SYSTEM
| Number | Designation | Engine 112.945 in model 463.209/232/233/244/245/250 | Engine 113.962 in Model 463.206/240/241/247/248 249/254 | Engine 113.982 in model 463.241/243/246 | ||
|---|---|---|---|---|---|---|
| BF20.00-P-1001-02K | Cooling system | Total filling capacity | Liters | ≈11, 5 | ≈12 | ≈ 11, 9 |
| Capacity of anticorrosion/antifreeze agent down to -37°C | Liters | ≈5, 8 | ≈6 | ≈5, 95 | ||
| Filling capacity of anticorrosion/antifreeze down to -45°C | Liters | ≈6, 4 | ≈6, 6 | ≈6, 55 | ||
| Specifications for Operating Fluids | Sheet | BB00.40-P-0310-01 | BB00.40-P-0310-01 | BB00.40-P-0310-01AAA | ||
| Sheet | BB00.40-P-0325-00 | BB00.40-P-0325-00 | BB00.40-P-0325-00AAA |
COOLING SYSTEM
| Number | Designation | Engine 113.993 in model 463.270/271 | ||
|---|---|---|---|---|
| BF20.00-P-1001-02K | Cooling system | Total filling capacity | Liters | ≈13, 0 |
| Capacity of anticorrosion/antifreeze agent down to -37°C | Liters | ≈6, 5 | ||
| Filling capacity of anticorrosion/antifreeze down to -45°C | Liters | ≈7, 3 | ||
| Specifications for Operating Fluids | Sheet | BB00.40-P-0310-01A | ||
| Sheet | BB00.40-P-0325-00A |
COOLING SYSTEM
| Number | Designation | Engine 273 in model 463 | ||
|---|---|---|---|---|
| BF20.00-P-1001-02U | Cooling system | Total filling capacity | ≈Liters | 6 |
| Antifreeze/water | Up to -37°C | 50/50 | ||
| up to -45°C | 55/45 | |||
| Specifications for Operating Fluids | Sheet | BB00.40-P-0310-01A | ||
| Sheet | BB00.40-P-0325-00A |