Remove/install front seat - AR91.10-P-1000Q

MODEL 209 

Shown on removed front seat, driver-side 

Fig 1: Identifying Front Seat Components - Driver-Side

Courtesy of MERCEDES-BENZ USA

Vehicles with code P98 Black Series 

Fig 2: Identifying Front Seat Components - Vehicles With Code P98 Black Series

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of injury  caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. Except model 202 as of 1.7.93	AS91.00-Z-0001-01A
	Notes on performing repair, body work and welding on vehicles with airbags or emergency tensioning retractor units		AH91.00-P-0002-01M
	Notes on seat occupied recognition	As of 1.6.04 with code (494) USA version, front passenger seat	AH91.60-P-0760-01P
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Assessment of airbag and emergency tensioning retractor units in accident vehicles		AH91.00-P-0006-01B
	Legal requirements on handling and storing airbags and emergency tensioning retractor units		AH91.00-P-0004-01A
1	Move left and right head restraint (2) down	On vehicles without code (P98) Black Series
2	Move steering wheel all the way up and to the front	When removing driver seat.
3	Move left and right front seat (1) toward the front
4	Remove rear bolts (3) from seat rails		*BA91.10-P-1001-01A
5	Remove bracket (7) and unthread seat belt (8) from front seat (1)	On vehicles with code (P98) Black Series and without code (494) USA version
			*BA91.40-P-1001-01A
6	Position front seat (1) to rear
7	Remove fire extinguisher	When removing driver seat on vehicles with code (682) Fire extinguisher and without code (P98) Black Series.
8	Remove front bolts (4) from seat rails		*BA91.10-P-1001-01A
9	Unclip and remove covers (5) at front and rear
10.1	Disconnect electrical connectors from driver seat connector block (X55/3) or front passenger seat connector block	On vehicles without code (P98) Black Series or on vehicles with code (494) USA version and code (P98) Black Series
10.2	Disconnect electrical connector (9) on underside of seat	On vehicles with code (P98) Black Series and without code (494) USA version
11	Remove front seat (1)	Installation:  Ensure the locking bolts are seated correctly.
12	Install in the reverse order