LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> CLK500 2D Convertible >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seats, Restraint Systems -- General Information -- 209 Chassis >> General Information >> Notes on seat occupied recognition - AH91.60-P-0760-01P

Notes on seat occupied recognition - AH91.60-P-0760-01P

Model 171 as of 1.6.06, 203.0/2 as of 1.6.04, 203.7 as of 1.4.04, 209 as of 1.6.04, 230 as of 1.3.06 and model 240 as of 1.9.06 with code (494) USA version, front passenger seat 

Shown on front passenger seat, model 203 

Fig 1: Identifying Pressure Sensor And WSS Control Unit - Front Passenger Seat, Model 203
G04738091

Shown on front passenger seat, model 230 

Fig 2: Identifying Pressure Sensor And WSS Control Unit - Front Passenger Seat, Model 230
G04738092

When removing the seat cushion, the connectors on pressure sensor (B48/4) (model 171, 203, 209, 230) or on seat occupied recognition pressure sensor (B48/4) (model 240) and on WSS (Weight Sensing System) control unit (N2/13) (model 203, 209) or on Weight Sensing System (WSS) control unit (N110) (model 171, 230, 240) must not be disconnected.

Disconnecting the connectors causes malfunctions of the supplemental restraint system (SRS) at the passenger side.

The new seat cushion is always supplied complete with pressure sensor (B48/4) (model 171, 203, 209, 230) or seat occupied recognition pressure sensor (B48/4) (model 240) and WSS (Weight Sensing System) control unit (N2/13) (model 203, 209) or Weight Sensing System (WSS) control unit (N110) (model 171, 230, 240) and is calibrated beforehand.

scientia non olet · About LEMON Manuals