Wiring diagram for ME-SFI [ME] gasoline injection and ignition system control unit - PE07.61-P-2101FAC
WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 272 in MODEL 204 Control unit N3/10, engine side
| Wiring diagram for ME-SFI [ME] gasoline injection and ignition system control unit | PE07.61-P-2101-97FAC | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Use of wiring diagrams | OV00.01-P-1901-03FAA | |
| Search aid for all wiring diagram groups | Wiring diagrams | OV00.01-P-1901FAA |
| Search aid for all wiring diagram groups | MODEL 204 | OV00.01-P-1901FAB |
| Search aid for all wiring diagram groups | MODEL 204 | OV00.01-P-1901FAC |
| Search aid for all wiring diagram groups | MODEL 204 | OV00.01-P-1901FAD |
| Search aid for all wiring diagram groups | MODEL 204 | OV00.01-P-1901FAE |
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28FAA | |
| Location and assignment of line and connectors | GF00.19-P-1000FAA | |
| Location and assignment of ground points | GF00.19-P-2000FAA | |
| Location and assignment of Z connector sleeves (line connectors in wiring harness) | GF00.19-P-3000FAA | |
| Overview of wiring diagrams covering multiple function groups | PE00.19-P-1100FAA | |
| Fuse and relay box, as-built configuration | MODEL 204.0 /2 up to model year 08/AEJ 07 | GF54.15-P-0800CW |
| Fuse and relay box, as-built configuration | MODEL 204.0 /2 as of model year 09 / AEJ 08 MODEL 204.9 |
GF54.15-P-0800CE |
| Repair wiring harness as per specified repair method | The original wire color is visible again after the repaired wire section (length about 30 cm). |
AR00.19-P-0001A |