Remove/install extinguishing agent reservoir squib - AR86.10-P-0104MB
MODEL 220.1 /8 with CODE (Z04) Light armoring with CODE (Z07) Top protection with fire extinguishing system
| Remove/Install | |||
| 1 | Remove extinguishing agent reservoir (1) | AR86.10-P-0100MB | |
| 2 | Bend locking plates (arrows) and unscrew nuts (2) | ||
| 3 | Remove extinguishing agent reservoir squib 1 (R42) or extinguishing agent reservoir squib 2 (R42/1) from extinguishing agent reservoir (1) | ||
| *BA86.10-P-1002-01B | |||
| 4 | Install in the reverse order | ||
| 5 | Perform self-test for fire extinguishing system | AR86.10-P-0101-01MB |
| Number | Designation | Model 220.1/8 with fire extinguishing system | |
|---|---|---|---|
| BA86.10-P-1002-01B | Nut, squib housing to extinguishing agent reservoir | Nm | 10 |